Sony VGC-RA910G - Manual (Page 59)

Setting Up Additional Equipment
59
Setting Up Additional Equipment
This section illustrates how to connect additional equipment with your VAIO
Digital Studio® computer. Your computer has both audio and video connection
capability. You can locate the appropriate connections on the back panel or
behind the lower bottom panel on the front of the computer. You can connect a
VCR or camcorder, using the composite audio In jacks. Your VCR or camcorder
may have either standard video or S-video connection capability.
Connecting an audio cable
1 Connect a dual audio cable (optional) to the composite audio L and R In
jacks, located on the either the front or rear panels of your computer.
2 Connect the other ends of the dual audio cable to your VCR or camcorder.
Connecting an S-video cable
1 Connect an S-video cable (optional) directly into the S-video jack on either
the front or back panel of your computer.
2 Connect the other end of the S-video cable into the appropriate port on your
compatible VCR or camcorder.
To connect a VCR or camcorder using an audio and S-video cable
Video cassette recorder (VCR)
Audio cable
(optional) S-video cable
(optional)
Camcorder