Sony PCG-R505ELK - Manual (Page 66)

If your computer is connected to the docking station
If you want to exchange data with another computer using the optional i.LINK cable and your computer is connected to the
docking station (supplied with selected models), perform the following:
1. Disconnect your computer from the docking station as described in the Disconnecting the computer from the
docking station section.
2. Disconnect the AC adapter and all cables from the docking station.
3. Using a thin pen tip, set the i.LINK network switch on the bottom of the docking station to the side marked .
Do not set the i.LINK network switch when the computer is on. The computer will malfunction.
i.LINK Network Switch
4. Connect the docking station to your computer as described in the Connecting the computer to the docking
station section.
5. Turn on the computer, and use the i.LINK cable to connect your computer to another computer.
6. After you have finished the "smart connect" session tasks, proceed as follows:
 Disconnect your computer from the docking station.
 Disconnect the i.LINK cable and all other cables from the docking station.
 Set the i.LINK network switch to the unmarked side.
Page 66