Installing a memory module – Sony PCG-R505ELK User Manual
Page 90
Installing a Memory Module
To install a memory module
1.
Turn off your computer and disconnect all peripheral devices, such as your printer.
2.
Unplug the computer and remove the battery packs.
3.
After the computer has cooled, loosed and remove the two screws with the
mark located on the bottom
of your computer. Use an appropriate screwdriver.
Screws on Bottom of Com puter
4.
Slide the LCD lock lever and lift the cover. Slide the keyboard toward the LCD display, then lift it away slightly.
Lifting the Keyboard
5.
Lift the keyboard from the LCD display side, then gently turn it over on the touchpad space. Be careful not to
detach the cable when lifting the keyboard.
Turning the Keyboard
6.
You must remove the existing memory module before you can install a new module. See
for instructions.
7.
Touch a metal object (such as the connector panel on the back of your computer) to discharge any static
electricity.
8.
Remove the new memory module from its packaging.
9.
Slide the memory module into the empty slot.
Page 90