Sony MZ-DH10P - Manual (Page 50)

4
Double-click [DCIM].
5
Double-click the folder where the
desired still image saved in.
6
Drag and drop the image files into
the [My Documents] folder.
The image files are copied to the “My
Documents” folder.
Note
When you try to copy an image to a folder in which
an image with the same file name is stored, the
overwrite confirmation message appears. When you
want to overwrite the existing image with the new
one, click [Yes]. In this time, the original one is
deleted. When you do not want to overwrite it, click
[No], then change the file name.
When a removable disk icon is not shown
1 Right-click [My Computer], then click
[Properties].
The “System Properties” screen appears.
2 Click [Device Manager] - [Other
Devices], and then confirm if there is a “
Sony DSC” or “ Sony Handycam” with a
mark.
3 If you find either of the devices above
click [Remove]- [OK].
The device is deleted.
4 Try the USB driver installation again
using the supplied CD-ROM.
When using Windows XP
The steps of copying still images to your
computer vary depending on the setup of your
computer.
1
Insert a disc in Hi-MD mode, and
then connect to your computer (

page 47).
2
Click [Copy pictures to a folder
on my computer using Microsoft
Scanner and Camera Wizard], then
click [OK].
The “Scanner and Camera Wizard” screen
appears.
3
Click [Next].
The contents in the disc appear.
4
Click the checkbox of still images
that you do not want to copy to
your computer and remove the
checkmark, then click [Next].
The “Picture Name and Destination”
screen appears.
5
Specify the image group names to
be copied and the copy destination,
then click [Next].
Image copying starts. When the copying
is completed, the “Other Options” screen
appears.
6
Select [Nothing. I’m finished
working with these pictures], then
click [Next].
The “Completing the Scanner and Camera
Wizard” screen appears.
7
Click [Finish].
The wizard closes. To continue copying
other still images, disconnect the USB
cable and reconnect it. Then, perform the
procedure from step 1 again.
50
MZ-DH10P.GB.2-590-278-11(2)