Sony MZ-DH10P - Manual (Page 54)

Shooting/Viewing still images
Symptom Case and/or corrective action
The subject does not appear in the
display.
 The player is in the viewing mode. Press / to change to
the shooting mode. ( page 24).
The image is out of focus.  The subject is too close. Make sure to position the lens farther
away from the subject than the shortest allowable shooting
distance (normal shooting mode: 50 cm (20 inches); macro
recording mode: 10 cm (4 inches)) when shooting.
The player cannot record still
images.
 No disc is inserted. Insert a disc.
 The capacity of the disc is insufficient. Delete the still images
saved in the disc or format it ( page 45).
 You tried to shoot and save still images when using a disc in
MD mode. Use a disc in Hi-MD mode ( page 67).
The flash does not work.  The flash is set to (no flash). Set the flash to auto (no
indicator) or (Forced flash) ( page 31).
The date and time are recorded
incorrectly.
 The date and time are not set correctly. Set the correct date and
time ( page 17).
The player cannot playback still
images.
 The player may not playback image files copied from the hard
disk of your computer if the file name or file size has been
changed or the image has been modified.
Even though you attempted to
delete all of the files, the disc is
still not empty.
 The disc contains a file with a file name or storage destination
that was changed through the computer. Format the disc (
page 45).
You have deleted an image by
mistake.
 Once you have deleted a file, you cannot restore it.
54
MZ-DH10P.GB.2-590-278-11(2)