Setting the display characters, Char setup – Sony MEX-5DI User Manual
Page 38
38
01US02CD-U.fm
MEX-5DI
3-242-048-11 (1)
masterpage:Left
9
Press
(ENTER)
.
After deleting is completed, the display
returns to the graphic top menu display.
10
Press
(GRAPHIC)
.
The display returns to the normal display.
Notes
• You cannot delete the pre-stored images in this unit.
• You can delete the image data while the unit must be
kept on.
• Make sure that you cannot restore an image once
you have deleted it.
• Depending on the volume of deleted data, the
deleting time differs. Do not turn off the unit while the
message in step 9 is displayed. If you turn off the
power, the data will not be deleted completely.
• If any button is pressed while deleting an image, the
delete is canceled and data will not be deleted
completely.
Tip
You can store up to the following number of images:
Wall Paper: maximum 100
Panorama: maximum 100
Jacket Pic: maximum 100
ClipMotion: maximum 16
Setting the display
characters
— Char Setup (Spectrum analyzer/Panorama/
Wall paper/Screen saver/Slide show mode)
You can adjust the visibility of the display by
changing the translucence ratio of the display
characters.
Making display characters disappear
automatically (Auto Clear)
You can make display characters disappear for a
moment in Spectrum analyzer/Panorama/Wall
paper/Screen saver/Slide show mode. When set
to ON, you can display the display characters
only when the disc, album, or track is changed or
the source or display mode is changed. You can
enjoy full images.
1
Playback or receive the source (radio,
CD, MS, MD, or AUX).
2
Press
(GRAPHIC)
.
3
Press
<
or
,
repeatedly to select
“Char Setup.”
Each time you press
< or ,, the item
changes as follows:
Wall Paper
y
Panorama
y
Jacket
Pic
y
ClipMotion
y
Slide Show
y
Picture Del
y
Char Setup
4
Press
(ENTER)
.
5
Press
M
or
m
to select “Auto Clear.”
6
Press
(ENTER)
.
7
Press
M
or
m
to select “ON.”
8
Press
(ENTER)
.
9
Press
(GRAPHIC)
.
The display returns to the normal display.
Note
In Standard/Clock mode, you cannot make the display
characters disappear automatically.