Sony MEX-5DI - Manual (Page 39)

39
01US02CD-U.fm masterpage:Right
MEX-5DI
3-242-048-11 (1)
Changing the translucence ratio of the
characters (Blend Level)
You can set the translucence ratio (color density)
of the characters in the Spectrum analyzer/
Panorama/Wall paper/Screen saver/Slide show
mode.
By setting this level down, you can adjust the
characters in the display to appear opaque.
1
Playback or receive the source (radio,
CD, MS, MD, or AUX).
2
Press (GRAPHIC) .
3
Press < or , repeatedly to select
“Char Setup.”
Each time you press < or ,, the item
changes as follows:
Wall Paper y Panorama y Jacket
Pic y ClipMotion y Slide Show y
Picture Del y Char Setup
4
Press (ENTER) .
5
Press M or m to select “Blend Level.”
6
Press (ENTER) .
7
Press < or , to select the
permeation ratio (Level 0-15).
The lower the level, the paler the display
characters.
8
Press (ENTER) .
9
Press (GRAPHIC) .
The display returns to the normal display.
Notes
• In Standard/Clock mode, you cannot change the
translucence ratio of the display characters.
• Set “Auto Clear” to “ON” (page 38), the translucence
ratio of the display characters does not change.
Other Functions
Adjusting the sound
characteristics
You can adjust the bass, treble, balance, fader,
and subwoofer volume.
1
Press (SOURCE) to select a source
(radio, CD, MD, MS, or AUX).
2
Press (SOUND) .
3
Press < or , repeatedly to select the
item you want to adjust.
Each time you press < or ,, the item
changes as follows:
DSO y EQ7 y Bass y Treble
y Balance (left-right)
y Fader (front-rear)
y SubWoofer (subwoofer volume)
4
Press (ENTER) .
5
Adjust the selected item by pressing
< or , .
6
Press (ENTER) .
Quickly attenuating the
sound
Press (ATT) .
“ATT” appears in the display for a while.
To restore the previous volume level, press
(ATT) again.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).