Sony FIU-810 - Manual (Page 30)

Certificate Manager: Registering Certificates to the Windows Certificate Store, Import/Export/Delete
Certification Authority (CA) Certificates
Detailed instructions on these operations can be found in the Puppy Suite Help file, accessible
from the [Start menu] or the [Puppy Suite] icon in the System Tray.
Disconnect / Connect Actions and Issues
To safely disconnect the Puppy unit, open [Unplug or Eject Hardware] in the system tray, choose
the "USB Mass Storage Device" associated with your Puppy unit (typically identified as the
Device with two drive letters (ie: F:,G:), and click [Stop]. Then disconnect the Puppy unit from
the PC. (For more information about [Unplug or Eject Hardware], please see Windows Help.)
When you disconnect the Puppy unit from your PC, you can select whether the Puppy Suite
software (1) does nothing, (2) locks your computer, or (3) logs you out of your computer. These
settings are available in [Puppy Suite Settings]. See below for more info on how to access these
settings.
Connect the Puppy Unit
What happens when you connect the Puppy unit will vary depending on whether you log onto
Windows with the device.
• If you logged on with the unit, and then disconnected it…
o Only the Puppy unit used for the user's logon will be recognized by the Puppy
Suite software. With other Puppy units, you cannot use most of the Puppy Suite
components.
• If you didn't log on with the Puppy unit…
o Any Puppy unit can be used with the Puppy Suite components.
Using Multiple Puppy Units
If you didn't log onto Windows with the Puppy unit, the Puppy Suite software can recognize
multiple Puppy units connected to the PC, and you can choose the Puppy unit you want to use.
The following steps show how to choose the Puppy unit.
1. Click the [Puppy Suite] icon and choose [Change Puppy] in the menu.
[List of Puppy] dialog box will appear.
2. Choose a Puppy unit you want to use and click [OK].
Puppy Suite Settings
To access Puppy Suite Settings, click the [Puppy Suite] icon in the System Tray and select
[Puppy Suite Settings].
Training Your Puppy® Unit Page 30