Section 2: installing the software, Hardware, Note – Sony FIU-810 User Manual
Page 8: User, Web browser, Ystem, Equirements for, Uppy, Uite, Ersonal
Section 2: Installing the Software
System Requirements for Puppy Suite™ Personal Software
Hardware
•
Intel® Pentium® 300MHz or higher processor (Pentium II 400MHz or higher
recommended)
•
64MB or higher (128MB or higher in Windows® XP)
•
5MB of free hard disk space
•
CD-ROM Drive
•
Available USB Port: Puppy unit must be connected directly to PC or via self-powered
hub.
Note
• Please be sure to connect the Puppy device directly to your PC's USB port or to a powered (AC
connected) USB hub when prompted during installation. The Puppy units will not be recognized if
connected to a 'self-powered' or unpowered hub, and your PC may become unstable. (USB ports in
keyboards and monitors are often not powered hubs)
• When cascading USB hubs, please connect the Puppy unit to the hub closest to the PC. (When
connecting the unit to the second or other hubs, operation is not guaranteed.)
User
•
You must be a user with administrator rights to install and use the Puppy Suite Personal
software.
OS
• Windows 2000 Professional Service Pack 3 or later
• Windows XP Professional Service Pack 1 or later
• Windows XP Home Edition Service Pack 1 or later
Note
• Windows 2000 Server & Windows 2000 Advanced Server operating systems are not supported.
• You cannot use "Fast User Switching" functionality when you install the "Windows Logon"
component on Windows XP operating systems.
• Password Provider functionality may not work correctly without "Service Pack 1" for Windows XP.
Web Browser
• Internet Explorer 5.01 SP2 or later
Training Your Puppy® Unit
Page 8