Recording movies, Press mode to turn on the (movie) lamp, Press start/stop to start recording – Sony NEX-VG900 User Manual

Page 29

Advertising
background image



Table of C

on

ten

ts

Sear
ch image

Inde
x

US

Recording movies

Press MODE to turn on the (Movie) lamp.

Press START/STOP to start recording.

The recording lamp lights up during recording (p. 111).
To stop recording, press START/STOP again.

Notes

The maximum continuous recordable time of movies is about 13 hours.

When a movie file exceeds 2 GB, the next movie file is created automatically.

It will take several seconds until you can start recording after you turn on the camcorder. You cannot

operate your camcorder during this time.

The following states will be indicated if data is still being written onto the recording media after recording

has finished. During this time, do not apply shock or vibration to the camcorder, or remove the battery or

AC Adaptor.

Access lamp (p. 26) is lit or flashing

The media icon in the upper right of the LCD screen is flashing

Hold the lens with your left hand to support the camera during recording (when you do not use a tripod).

Make sure that your fingers are not touching the microphone.

Tips

See page 96 on the recordable time of movies.

The IRIS, Shutter Speed, Gain and Exposure are set to automatic adjustment when PROGRAM AE is

pressed.

[

SteadyShot] is set to [Standard] in the default setting. Note that if the attached lens does not have an

image stabilizing feature, SteadyShot will not be usable.

You can capture photos from recorded movies (NEX-VG900) (p. 53).

You can check the recordable time, estimated remaining capacity, etc., by touching

(MENU) 

[Setup]  [ (

Media Settings)]  [Media Info] (p. 81).






MODE button

(Movie): When recording a movie

(Photo): When recording a photo

[STBY]  [REC]

START/STOP

button

Advertising