Sony NEX-VG900 - Manual (Page 63)


Table of C
on
ten
ts
Sear
ch image
Inde
x
US
Creating a standard
definition image
quality (STD) disc with
a recorder, etc.
You can copy images played back on your
camcorder to a disc or video cassette,
by connecting your camcorder to a disc
recorder, etc., with the A/V connecting
cable. Connect the device in either way
of  or . Refer also to the instruction
manuals supplied with the devices to be
connected.
Notes
Connect your camcorder to the wall outlet (wall
socket) using the supplied AC Adaptor for this
operation (p. 16).
High definition image quality (HD) movies
will be copied with standard definition image
quality (STD).



 A/V connecting cable (supplied)
 A/V connecting cable with S VIDEO
(sold separately)
By using this cable, higher quality
images can be produced than with an A/
V connecting cable. Connect the white
and red plug (left/right audio) and the S
VIDEO plug (S VIDEO channel) of the
A/V connecting cable with an S VIDEO
cable. If you connect the S VIDEO
plug only, you will hear no sound. The
yellow plug (video) connection is not
necessary.
1
Insert the recording media in the
recording device.
If your recording device has an input
selector, set it to the input mode.

A/V Remote Connector
Input
S VIDEO
VIDEO
(Yellow)
(White)
AUDIO
Signal flow
(Yellow)
(Red)