Sony NEX-VG900 - Manual (Page 85)


Table of C
on
ten
ts
Sear
ch image
Inde
x
US
Notes
If the eye sensor does not work even though
your eye moves close to the viewfinder, the
screen will be displayed on the LCD screen,
even though [VF/Panel] is set to [Auto].
Display Setting
You can set the duration of displaying the
icons or indicators on the LCD screen.
 Auto
Displays for about 3 seconds. The rec
button on the LCD screen is displayed when
shooting.
On
Always displays. The rec button on the LCD
screen is not displayed when shooting.
Tips
The icons or indicators are displayed in the
following cases.
When you turn on your camcorder.
The LCD screen is touched (Except rec button
on LCD screen).
When you switch your camcorder to the
movie recording, photo recording, or
playback mode.
You can switch the display by pressing
DISPLAY.
REC Lamp (Recording lamp)
You can make the camera recording lamp
on the front of your camcorder not to turn
on.
 On
The camera recording lamp lights up.
Off
The camera recording lamp does not light up.








Shooting w/o Lens
Sets whether or not the recording can be
started when no lens is attached.
 Disable
The camcorder does not start shooting, and
informs you if the lens is attached incorrectly.
Enable
Allows you to use non-Sony E-mount lenses
and mount adaptors.
Remote Ctrl (Remote control)
 On
Select this when you use the supplied Wireless
Remote Commander (p. 112).
Off
Select this if you do not intend to use the
supplied Wireless Remote Commander.
Tips
Select [Off] when you want to prevent your
camcorder from responding to a command sent
by another remote control unit.
A. Shut Off (Auto shut off)
You can set your camcorder to turn off
automatically when you do not operate
your camcorder for more than about 5
minutes.
 On
The camcorder turns off automatically.
Off
The camcorder does not turn off
automatically.
Notes
The camcorder does not turn off automatically
when using the AC Adaptor.



