Sony MHC-NX1 - Manual (Page 17)

Basic Operations
17
§
– +
0
g
)
≠ + – +
1
2
3
4
5
§
§ §
·
ª · π ª · π
∏ π
DOLBY NR
π π
1
Press § and insert a recorded tape
in deck A and a recordable tape in
deck B.
2
Press HI DUB.
Deck B stands by for recording.
3
Press DIRECTION repeatedly to
select
A to record on one side.
Select ß (or RELAY) to record on
both sides.
4
Press REC PAUSE/START.
Dubbing starts.
To stop dubbing
Press π on deck A or B.
Tips
• When you dub on both sides, start recording from
the front side. If you record from the reverse side,
recording stops at the end of the reverse side.
• If you set DIRECTION to ß when the tapes you
use have different lengths, the tape in each deck
reverses independently. If you select RELAY, the
tapes on both decks reverse together.
• You don’t have to set DOLBY NR, since the tape in
deck B is automatically recorded in the same state
as the tape in deck A.
• Dolby NR is off and DIRECTION ( A or RELAY)
is ß when the mains AC power supply is
switched off.
Recording from a
tape
— High-speed Dubbing With the side
you want to
play/record
facing forward
You can use TYPE I (normal) or TYPE II
(CrO2) tapes. The recording level is
automatically adjusted.
1/u
(Power)
1 1 3 2 4