Sony MHC-NX1 - Manual (Page 8)

8
TUNED
STEREO
TUNED
STEREO
M H z
– +
0
g
)
≠ + – +
n
n
Preset number
Step 3: Presetting
radio stations
You can preset the following number of
stations:
– 2 band model: 20 for FM, 10 for AM.
– 3 band model: 20 for FM, 10 for MW, and
10 for SW, or 20 for FM, 10 for AM and 5
for UKV, depending on the model you
purchased.
2
3
4
Jog dial
1
1/u
(Power)
1
Press TUNER BAND repeatedly
until the band you want appears in
the display.
The bands you can receive vary
depending on the model you purchased.
Be sure to check which bands you can
receive.
Every time you press this button, the
band changes as follows:
2 band model:
FM ˜ AM
3 band model:
FM n MW n SW
or
FM n AM n UKV*
* “STEREO PLUS” is displayed when
you select UKV.
2
Press and hold + or – until the
frequency indication starts to
change, then release.
Scanning stops when the system tunes in
a station. “TUNED” and “STEREO” (for
a stereo program) appear.
3
Press TUNER MEMORY.
A preset number flashes in the display.
The stations are stored from preset
number 1.
4
Press ENTER.
The station is stored.
5
Repeat steps 1 to 4 to store other
stations.