Sony MHC-NX1 - Manual (Page 7)

7
1
Press CLOCK/TIMER.
The hour indication flashes.
2
Press V or v to set the hour.
The clock is on a 24-hour system for the
European model and a 12-hour system
for other models.
3
Press ENTER.
The minute indication flashes.
4
Press V or v to set the minute.
5
Press ENTER.
The clock starts working.
Tips
• If you’ve made a mistake, start over from step 1.
• Setting the time deactivates the demo mode.
If you want to display the demo mode, press
DISPLAY (U.S.A., Canadian and European
models) or DEMO (STANDBY) (other models)
when the power is off.
To change the time
The previous explanation shows you how to
set the time while the power is off. To change
the time while the power is on, do the
following:
1 Press CLOCK/TIMER.
2 Press V or v to select the SET CLOCK.
3 Press ENTER.
4 Perform steps 2 through 5 above.
Note
The clock settings are cancelled when you
disconnect the power cord or if a power failure
occurs.
) 0 P
+ = p
·
· ª
· ª
· p
V
v
b B
You must set the time before using the timer
functions.
The clock is on a 24-hour system for the
European model, and a 12-hour system for
other models.
The 24-hour system model is used for
illustration purposes.
Step 2: Setting the
time
2,4
3,5
1