Sony PEG-NZ90 - Manual (Page 15)

15
My CLIÉ handhel
d
is
not working pr
operly
The backlight does not turn on when I adjust the
brightness level
B If the brightness is set to the lowest level, the display may be illegible, but
this is not a malfunction.
I can’t read the screen properly
B Depending upon the angle of vision, the brightness may be uneven, but this
is not a malfunction. You can adjust the brightness level by tapping the
Brightness Adjustment icon in the bottom left-hand corner of the screen. If
the backlight is set to off, you can turn it on by sliding the POWER switch
for more than two seconds.
Software or Applications do not operate properly after I
perform a soft reset
B If you encounter software or application problems (such as improper
operations, unusual display, or freezing during a soft reset), after you
performed a reset, the reset may not be completed properly. In this case,
perform a soft reset once again. If you cannot solve your problem by
performing a soft reset, try a hard reset.
b For details, refer to “Basic operations of your Sony CLIÉ™ handheld:
Restarting your Sony CLIÉ handheld” in the “Read This First (Operating
Instructions).”
After performing a reset, do not press the reset button until the
Preferences screen or the Welcome screen is displayed.
I cannot use the Jog Dial™ navigator
B The Jog Dial™ navigator is not available for all applications.
Note on performing a reset