Sony PEG-NZ90 - Manual (Page 21)

21
I ca
nnot pe
rf
orm a
HotS
ync
®
operation
The Palm™ Desktop for CLIÉ software does not start or
cannot be selected from the menu
B Is the Palm™ Desktop for CLIÉ software properly installed on your
computer?
The hardware or the software of your computer may not be compatible
with the Palm™ Desktop for CLIÉ software. Uninstall the Palm™
Desktop for CLIÉ software and reinstall.
The HotSync Manager does not start (the HotSync icon
is not displayed in the bottom right-hand corner of your
computer screen)
B Reinstall the Palm™ Desktop for CLIÉ software.
Mail software on computer starts automatically when
starting a HotSync
®
operation
B A mail software that you do not use regularly or a mail software that is not
installed is selected in Mail setup.
Click the HotSync
icon in the bottom right-hand corner of your
computer screen and select Custom. Select Mail from conduit, click
Change, start Mail setup and specify the mail software that you use
regularly.
B The settings of the mail software are not complete.
Set the mail software properly on your computer.
I cannot perform a HotSync
®
operation via a modem
Checking your CLIÉ handheld
B Check that you enter the correct phone number for the access point.
B If you are using call waiting on your service line, tap Network and Phone
in the Preference screen, and select the Disable call waiting check box
in the Phone Setup screen and enter the correct phone number.
Continued on next page
• • • • • • • • • • • • • • • • • • • • • • • • •