Peripheral devices are not recognized, I cannot play music (audio player), Playing music – Sony PEG-NZ90 User Manual

Page 36: There is no sound, The sound is too low, The sound is noisy

Advertising
background image

36

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Peripheral devices are not recognized

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

I cannot play music (Audio Player)

Playing music

B After you turn off your CLIÉ handheld, remove the peripheral device or

the network card and reconnect it.

B For the latest information on peripheral devices and network cards

supported by your CLIÉ handheld, refer to the website below and select
your model.
http://www.sony.com/peg/support/

There is no sound

B Increase the volume.

B Check that the volume is not set to the Muting mode.

b

For details, refer to “My CLIÉ handheld is not making any sounds” on page 14.

The sound is too low

B Tap AVLS and switch to the normal display.

The sound is noisy

B If you are using other applications of your CLIÉ handheld and processing

the data when playing the music, there will be some noise.

Advertising