Sony PEG-NZ90 - Manual (Page 40)

40
After I connect to the computer, the drive is recognized
but the contents cannot be found
B Reconnect your CLIÉ handheld to your computer after inserting a
“Memory Stick” media.
Operation during connection becomes unstable
B If you connect the cradle to your computer via a USB hub or extension
USB cable, you may not be able operate your CLIÉ handheld properly.
Make sure you connect the cradle directly to a USB port of your computer.
The error message “Unsafe Removal of Device” is suddenly
displayed on your computer screen
B Do not remove the CLIÉ handheld from the cradle or tap Exit during check
in/check out (sending music).