Sony LBT-SH2000 - Manual (Page 18)

model name [LBT-SH2000]
[4-273-674-81(1)] US
18 US
filename[D:\NORM'S JOB\SONY HA\SO120012\LBT-
SH2000\4273674811_US\US06BAS.fm] masterpage:Left
To create a new MP3 file
Press REC TO USB B.
“NEW TRACK” appears in the display
panel.
If you press REC TO USB B again after a
few seconds, a new MP3 file cannot be
created.
Note
When a new MP3 file is created, transferring is
disabled for the time being.
Tip
A new MP3 file is created automatically after
approximately 1 hour of transferring.
You can easily transfer the audio files
from a USB device to another USB device
(USB A-USB B Synchronized Transfer).
You can also transfer a single audio file
during playback (USB A-USB B REC1
Transferring).
1
Connect a transferable USB
device to the
B port, then
connect the USB device you
want to transfer to
A port.
2
Press USB/USB SELECT
repeatedly to select “USB A”.
3
For USB A-USB B Synchronized
Transfer:
When playback is stopped, press
PLAY MODE on the remote control
repeatedly to select the play mode you
want.
Note
If you start transferring in “ALL USB”,
“ALL USB SHUF”, “1 USB SHUF” and
Repeat Play, the play mode automatically
changes to “1 USB”.
If you start transferring in “
SHUF”, the
play mode automatically changes to “ ”.
For USB A-USB B REC1
Transferring:
Select the audio file you want to
transfer, then start playback.
4
Press REC TO USB B.
“PUSH ENTER” appears in the
display panel.
5
Press ENTER.
Transferring starts when “DON’T
REMOVE” appears in the display
panel.
For USB A-USB B Synchronized
Transfer:
When the transferring is completed,
both USB devices stop automatically.
For USB A-USB B REC1
Transferring:
When the transferring is completed,
the audio file continues to play.
When transferring to a USB device, a
“MUSIC” folder is created directly below
the “ROOT”. Folders and files are
generated within this “MUSIC” folder as
follows.
CD-USB Synchronized Transfer
CD-USB REC1 Transferring
Transferring music from USB
device
Folder and file generation
rules
Transferring
source Folder name File name
MP3 Same as the transferring source
AUDIO CD “CDDA0001”* “TRACK001”*
Transferring
source Folder name File name
MP3
“REC1-MP3”
Same as the
transferring
source
AUDIO CD “REC1-CD” “TRACK001”*