Sony LBT-SH2000 - Manual (Page 23)

model name [LBT-SH2000]
[4-273-674-81(1)] US
23 US
filename[D:\NORM'S JOB\SONY HA\SO120012\LBT-
SH2000\4273674811_US\US07OTH.fm] masterpage:Right
Ot
he
r Op
er
a
tio
ns
Using the timers
The system offers three timer functions.
You cannot activate both the Play Timer
and the Recording Timer at the same time.
If you use either with the Sleep Timer, the
Sleep Timer has priority.
You can fall asleep to music. The system
turns off after the preset time.
Press SLEEP on the remote control
repeatedly.
Tip
To check the remaining time before the system
turns off, press SLEEP on the remote control.
To cancel Sleep Timer
Press SLEEP on the remote control
repeatedly to select “SLEEP OFF”.
Make sure you have set the clock.
Use the button on the remote control to
perform this operation.
Play Timer:
You can wake up to disc, tuner or USB
device at a preset time.
Recording Timer:
You can transfer music from a preset radio
station into a USB device at a specified
time.
1
For Play Timer:
Prepare the sound source, and then
press VOLUME +/– to adjust the
volume.
To start from a specific track or file,
create your own program (page 13).
For Recording Timer:
Tune to the preset radio station
(page 15).
2
Press CLOCK/TIMER SET.
3
Press ./> repeatedly to
select “PLAY SET” or “REC
SET”, then press ENTER.
4
Set the time to start playing or
transferring.
Press ./> repeatedly to set the
hour/minute, then press ENTER.
5
Use the same procedure as in
step 4 to set the time to stop
playing or transferring.
6
Press ./> repeatedly to
select the sound source you
want, then press ENTER.
For Recording Timer:
Connect a transferable USB device to
the
B port on the unit.
7
Press "/1 to turn off the system.
To check the timer setting or
activate the timer again
Press CLOCK/TIMER SELECT, press
./> repeatedly to select “PLAY
SELECT” or “REC SELECT”, then press
ENTER.
To cancel the timer
Press CLOCK/TIMER SELECT, press
./> repeatedly to select “TIMER
OFF”, then press ENTER.
Notes
• The system turns on before the preset time. If
the system is turned on at the preset time or if
“STANDBY” flashes in the display panel, the
Play Timer and the Recording Timer will not
play or transfer.
• Do not operate the system from the time the
system turns on until the playback or
transferring starts.
Sleep Timer
Play Timer/Recording Timer