Creating a party atmosphere (dj effect), Other operations, Singing along – Sony LBT-SH2000 User Manual

Page 22: Changing the lighting pattern on the speakers, Creating a party atmosphere, Changing the lighting pattern on the speakers 1

Advertising
background image

model name [LBT-SH2000]

[4-273-674-81(1)] US

22

US

filename[D:\NORM'S JOB\SONY HA\SO120012\LBT-
SH2000\4273674811_US\US07OTH.fm]

masterpage:Left

Creating a party
atmosphere

(DJ EFFECT)

1

Press the following button to
select the effect type.

• FLANGER: Create a deep flanging

effect that is similar to the roar of a
jet plane.

• ISOLATOR: Isolate a specific

frequency band by adjusting the
other frequency bands. For example,
when you want to focus on only
vocal, etc.

• SOUND FLASH: Flash the sound

output. The sound cuts off
periodically.

• PHASER: Create a series of peaks

and troughs in the frequency
spectrum, like a sweeping effect.

2

Turn DJ CONTROL to adjust the
effect level.

To turn off the effect

Press the selected effect button again.

Notes

• The DJ EFFECT is automatically turned off

when you turn off the system, change the
function or change the tuner band.

• If you activate the DJ EFFECT during

transferring, the sound effect will not be
transferred onto the USB device.

• You cannot use VOLUME/DJ CONTROL to

adjust the volume when the DJ EFFECT is
activated. Press VOLUME +/– on the remote
control to adjust the volume.

Singing along

You can sing along with any audio source
that played back on this system.

1

Turn MIC LEVEL to MIN to
reduce the microphone volume
level.

2

Connect a microphone to the
MIC jack on the unit.

3

Start playing the music and
adjust the volume.

4

Turn MIC LEVEL to adjust the
microphone volume.

If acoustic feedback (howling) occurs,
reduce the volume, move the
microphone away from the speakers,
or change the direction of the
microphone.
After you have finished, disconnect the
microphone.

Note

During transferring, the sound from microphone
will not be transferred onto the USB device.

Changing the lighting
pattern on the
speakers

1

Press OPTIONS.

2

Press

/

repeatedly to select

“LED SPEAKER”, then press
ENTER.

3

Press

/

repeatedly to select

the speaker lighting pattern you
want, then press ENTER.

To turn off the lighting, select
“PATTERN OFF”.

Other Operations

Advertising