AT&T ML17959 - Manual (Page 31)

26
Menu setup
Priority code
Priority calling allows a caller to enter a code during the outgoing
announcement that plays a special tone so that you know who is calling.
To enable a priority call, set the priority code to
on and enter a three-digit
priority code ( 000-999). If you do not use this feature, set the priority code
to off. The default priority code is 999. To change the settings:
When the telephone is idle, press MENu.
Press or to scroll to Answering sys. Press ENTER.
Press or to scroll to Mailbox 1 or Mailbox 2 to
select the desired line. Press ENTER.
Press or to scroll to Ans sys setup. Press ENTER.
Press or to scroll to Priority code. Press ENTER.
Press or to select on or off.
If you select on, do the following:
Press ENTER.
Press the dialing keys ( 0-9) to enter a three-
digit code. Press /
REPEAT
or /
SKIP
to move
the cursor to the left or right. Press DELETE to
backspace and erase a digit.
Press
ENTER to save the digits.
-oR-
If you select
off, press ENTER to save your selection.
The telephone plays a confirmation tone and returns to the previous menu.
Message alert tone
If you turn this feature on, the telephone beeps every 10 seconds when there
are new messages. The tone stops when all new messages have been played.
When the telephone is idle, press MENu.
Press or to scroll to Answering sys. Press ENTER.
Press or to scroll to Mailbox 1 or Mailbox 2 to
select a desired mailbox. Press ENTER.
Press or to scroll to Ans sys setup. Press ENTER.
Press or to scroll to Msg alert tone. Press ENTER.
Press or to select on or off.
Press ENTER to save your selection. The telephone plays
a confirmation tone and returns to the previous menu.
NOTE: The answering system must be turned on for the message alert tone to function.
1.
2.
3.
4.
5.
6.
a.
b.
c.
1.
2.
3.
4.
5.
6.
7.
aNS SyS SETUP M1
Msg length
Remote code
Priority code
1
PRIORITy CODE
On
Off
1
PRIORITy CODE
99_
1
aNS SyS SETUP M1
Msg length
Remote code
Priority code
1
PRIORITy CODE
On
Off
1
PRIORITy CODE
99_
1
aNS SyS STEUP M1
Remote code
Priority code
Msg alert tone
1
MSG aLERT TONE
On
Off
1
aNS SyS STEUP M1
Remote code
Priority code
Msg alert tone
1
MSG aLERT TONE
On
Off
1
Answering system settings