AT&T ML17959 - Manual (Page 39)

34
Telephone operation
Options while on calls
Temporary tone dialing
If you have dial pulse (rotary) dialing service only, use this feature to
temporarily switch from dial pulse to touch-tone dialing during a call.
During a call, press .
Use the dialing keys to enter the number you wish to dial. The telephone
sends touch-tone signals. The telephone automatically returns to pulse dial
mode after you end the call.
Switching between lines
Use this feature to switch between lines during a call.
While on a call, press hoLD to put the call on hold. Then press the LINE
button not in use to establish a new call or answer an incoming call on
the other line.
To return to the first call, press
hoLD to put the second call on hold. Then
press the original LINE button.
Conference calls
Use this feature to set up a three-party call by using two lines at the same time.
To make a three-way conference call:
Make or answer a call.
Press
hoLD to put the call on hold. Press the other
LINE button to establish a new call or answer an
incoming call.
Press
CoNf to begin a three-party conference call.
The screen displays Lines 1 and 2 in conference.
If one caller hangs up during a conference call, a tone
will play. Press the
LINE button of the remaining call to
disconnect the other line and stop the tone.
To place a conference call on hold:
While on a conference call, press hoLD to hold
both lines.
Press
CoNf to release hold and continue the
conference call.
To talk privately with one caller:
Press hoLD to hold both lines. Press the desired LINE button for the caller
you want to speak with.
Press
CoNf to continue the conference call.
1.
2.
1.
2.
1.
2.
3.
1.
2.
1.
2.
CoNf CoNf
Lines 1 and 2
in conference Lines 1 and 2
in conference
L1:ON HOLD
L2:ON HOLD
8:00am 1/11
L1:ON HOLD
L2:ON HOLD
8:00am 1/11