AT&T ML17959 - Manual (Page 32)

27
Menu setup
Voicemail indicator settings
voicemail indicator
If you subscribe to voicemail service offered by your telephone service provider,
this feature provides a visual indication when you have
new voicemail messages on either line.
voicemail
displays and the corresponding line blinks on the
screen to indicate there are new voicemail messages
on that line.
NOTE: This feature does not indicate new answering system message recorded on your
telephone answering system. For more information about the difference between the
answering system and voicemail, see page 52.
Clear voicemail indication
After you have listened to all new voicemail messages, the indicators turn off
automatically.
Use the clear voicemail feature when the telephone indicates that there is
new voicemail when there is none (for example, when you have accessed
your voicemail while away from home). The clear voicemail feature only turns
off the indicators; it does not delete your voicemail messages. As long as you
have new voicemail messages, your telephone service provider continues to
send the signal that turns on the indicator.
To manually turn off the indicator, follow the steps below.
When the telephone is idle, press MENu.
Press or to scroll to voicemail.
Press ENTER.
Press or to scroll to Clr voicemail.
Press ENTER.
Press or to select Line 1, Line 2 or Lines 1 & 2.
Press ENTER to save your selection. The screen
displays vM indicator cleared and then returns to the
previous menu.
1.
2.
3.
4.
5.
L2:12 Missed
Voicemail:L1 L2
8:00am 1/11
L2:12 Missed
Voicemail:L1 L2
8:00am 1/11
Phone settings
Call settings
answering sys
Voicemail
VOICEMaIL
Clr voicemail
L1 covm ON/OFF
L2 covm ON/OFF
CLEaR VOICEMaIL
Line 1
Line 2
Lines 1 & 2
Phone settings
Call settings
answering sys
Voicemail
VOICEMaIL
Clr voicemail
L1 covm ON/OFF
L2 covm ON/OFF
CLEaR VOICEMaIL
Line 1
Line 2
Lines 1 & 2