Panasonic CQRX300N - Manual (Page 6)

CQ-RX400N/CQ-RX300N/CQ-RX200N 10 CQ-RX400N/CQ-RX300N/CQ-RX200N 11
iPod Control
Operation Flow
Repeat, Shuffl
e Play
Connection of the optional direct cable for iPod (CA-DC300N) allows users to operate the iPod including fi le selection and fi le
sequence change with the buttons on this unit.
By connecting iPod series to USB connector via a USB extension cable for iPod (USB 2.0, not included), you can enjoy music fi les
stored on the iPod series in your car.
\CQ-RX400N\
Playing Mode Selection
(LIST)
iPod Mode Display
• Lights when the direct cable for iPod (CA-DC300N) is
connected and iPod mode is selected.
• Lights when a USB extension cable
for iPod and iPod are connected
with USB connector and USB mode
is selected.
\CQ-RX400N\
• iPod number, 1 (iPod 1)/2 (iPod 2),
Lights when the Expansion Module
(CY-EM100N) is connected.
• If an iPod is connected to the USB
connector, the iPod number is not
displayed.
\CQ-RX400N\
Display Change
(DISP: Display)
Repeat Play
The current fi le is repeated.
Press [6] (REPEAT). lights.
Press again to cancel.
Note: The All Repeat Play function of iPod is always
activated and cannot be canceled from this unit.
Shuffl e
The shuffl e function of iPod corresponds to the
RANDOM function of this unit.
Songs
All the available fi les are played in a random sequence.
Press [4] (RANDOM). lights.
Press again to cancel.
Albums
All the playable albums are played in a random
sequence.
Hold down [4] (RANDOM) for 2 sec. or
more.
blinks.
Hold down again to cancel.
Notes:
• Hold down for fast forward/reverse.
• When fast forward comes to the end of a fi le or
fast reverse comes to the beginning of a fi le,
regular playback starts even if the fast forward or
reverse button is pressed.
Pause
Press [BAND] ( ).
Press again to cancel.
Play Mode indicators
Lights when each mode is activated.
Repeat play
Shuffl e play (songs)
Blinks when each mode is activated.
Shuffl e play (albums)
Press [DISP]. Current fi le/all fi les/iPod
number (Default)
Time/iPod number
(Data reading)
Title name
(Data reading)
Album name
(Data reading)
Artist name
Clock time
Notes:
• To have another circle scroll while a text is displayed,
press [3] (SCROLL). If the number of displayed
characters is 8 or less, the characters do not scroll.
• “NO TEXT” is displayed when there is no information.
File indicator (Current fi le/All fi les)
A number up to 999 is displayable.
1 Connect the iPod.
2 Press [SRC] to select the iPod mode.
Playback starts.
Notes:
• If playback does not start, press [BAND]
( ).
• Select USB mode to operate iPod series
connected with USB connector. \CQ-RX400N\
File Selection
[ ]: Next fi le
[ ]: Beginning of the current fi le
For the preceding fi le, press twice.
1 Press [ ] (LIST) to activate the
Playing Mode Selection mode.
2 Turn [VOL] clockwise or
counterclockwise to adjust.
PLAYLIST: Playback by playlist (Default)
ARTIST: Playback by artist
ALBUM: Playback by album
GENRE: Playback by genre
3 Press [VOL] (PUSH SEL:
Select) to determine the
selection.
4 Turn [VOL] clockwise or
counterclockwise to select a
portion to be played.
5 Press [VOL] (PUSH SEL:
Select) to determine the
selection.
Note: To select playing mode in
step 2, press [
] (LIST).
Notes:
• To return to the regular mode, press [DISP].
• Files without an album name or an artist name are not
playable in the playing mode of the album or artist
display respectively.
Lights when a USB extension cable for iPod
and iPod are connected with USB connector
and USB mode is selected.
\CQ-RX400N\
Notes:
• Make sure to detach the iPod after turning off the car engine
(turning the ACC to OFF). The iPod may not shut down while
still connected, which may result in battery depletion.
• Do not connect iPod accessories such as the remote
controller or headphones while the iPod is connected to this
unit. Doing so may cause the iPod to not operate correctly.
• Connect this unit after turning down the volume of the iPod.
• “NO IPOD” appears until the iPod is recognized after
connecting the iPod, turning on the power of the main unit,
or performing source selection on the main unit side. This
indicates there is nothing wrong with the main unit.
• We do not guarantee all the operations of connectable devices.
Controllable iPod/software version (System-up connector)
• 4th generation iPod/ver. 3.1.1
• 5th generation iPod/ver. 1.2.1 (Video playback is not
supported.)
• iPod photo/ver. 1.2.1
• iPod mini/ver. 1.4.1
• 1st generation iPod nano/ver. 1.3.1
• 2nd generation iPod nano/ver. 1.1.3
Controllable iPod/software version (USB connector)
• 5th generation iPod/ver. 1.2.1 (Video playback is not
supported.)
• 1st generation iPod nano/ver. 1.3.1
• 2nd generation iPod nano/ver. 1.1.3
Operation check has been completed with software available at
the end of September, 2007. We do not guarantee the operation
with our future products or upgraded software.
For the models to be supported, visit the Web Site at http://
panasonic.net (refer to the description regarding Car Audio/AV).
English English