Axis Communications AXIS 214 PTZ - Manual (Page 40)

40 AXIS 214 PTZ - Event Configuration
Motion Detection Parameters
The parameters available for motion detection are described briefly here. Please see the
online help for complete descriptions.
High Only very large objects
trigger motion detection An object that appears in the
region will trigger the motion
detection for a long period Ordinary colored objects against ordi-
nary backgrounds will trigger the
motion detection
Low Even very small objects
trigger motion detection An object that appears in the
region will trigger motion detection
for only a very short period Only very bright objects against a dark
background will trigger motion detec-
tion
Default values Low Medium to High Medium to High
Examples:
• Avoid triggering on small objects in the image by selecting a high size level.
• To trigger motion detection as long as there is activity in the area, select a high history level.
• To only detect flashing light, low sensitivity can be selected. In other cases, a high sensitivity level is
recommended.
Port Status
Under Event Configuration > Port Status there is a list that shows the status for the
connected inputs and outputs of the AXIS 214 PTZ for the benefit of the Operator who
cannot access the System Options section.
Example:
If the Normal state for a push button connected to an input is set to Inactive - as long as the button is
not pushed, the state will be inactive. If the button is pushed, the state of the input changes to active.
Parameter Size History Sensitivity