Axis 214 ptz - technical specifications – Axis Communications AXIS 214 PTZ User Manual

Page 57

Advertising
background image

57

AXIS 214 PTZ - Technical Specifications

Processors, memory, clock

• CPU: ETRAX 100LX 32-bit RISC CPU
• Video processing and compression: ARTPEC-2
• RAM: 32 MB
• Flash: 8 MB

Power

• External power adapter (included): 12V DC, 36W
• Via terminal connector: 10.8-13 VDC, max 13W

Operating conditions

• +5 to +45 ºC (41 to 113 ºF)
• Humidity 20 - 80% RH (non-condensing)

Audio

G.711 PCM 64kbit/s, G.726 ADPCM 32 or 24 kbit/s, full duplex, half duplex,
simplex or audio off

Line/Mic in

3.5mm input for mono microphone, or line-in mono signal (only left channel
is used from a stereo signal).
Mic input - High sensitivity: max -38 dBu (27 mVpp)
Mic input - Low sensitivity: max -32 dBu (54 mVpp)
Line/Mic In (mono): max 1.5 dBu (2.6 Vpp)
DC power for external microphone supported through the input connector.

Line out

Mono audio output (line level). Connects to a PA system or active speaker
with built-in amplifier. Headphones can also be attached.
Line Out: max 1.5 dBu (2.6 Vpp)
Line Out impedance: min 32 ohm

Installation, management

and maintenance

• AXIS IP Utility - Installation tool. Available on CD supplied with product.
• AXIS Camera Management - Tool for installation/management of multiple

Axis network video products. Available on CD supplied with product.

• Web-based configuration.
• Configuration backup and restore.
• Firmware upgrades over HTTP or FTP over TCP/IP, firmware available at

www.axis.com

Video access from

Web browser

Camera live view for up to 20 clients, sequence tour capability

Minimum web browsing

requirements

• Pentium III CPU 500 MHz or higher, or equivalent AMD Athlon Memory
• 128 MB RAM
• AGP graphic card, Direct Draw, 16 MB video memory (32/64 MB

recommended for high resolutions/color depths)

• Windows XP, 2000, NT4.0*, ME* or 98*
• Internet Explorer 5.x or later
• For other operating systems and browsers see www.axis.com/techsup
* Motion JPEG only

System integration support • Powerful API for software integration available at www.axis.com, including

HTTP API, AXIS Media Control SDK, event trigger data in video stream,
embedded scripting, customized HTML pages

• Embedded operating system: Linux 2.4

Supported protocols

IP, HTTP, HTTPS, SSL/TLS, TCP, ICMP, SNMPv1/v2c/v3 (MIB-II), RTSP, RTP, UDP,
IGMP, RTCP, SMTP, FTP, DHCP, UPnP, ARP, DNS, DynDNS, SOCKS, NTP
More information on protocol usage available at www.axis.com

Item

Specification

Advertising