Axis Communications AXIS 214 PTZ - Manual (Page 60)

60 AXIS 214 PTZ - Technical Specifications
Important!
•The figures displayed here are the values as delivered by the camera. If other restrictions are
currently in force, (e.g. bandwidth limitation) these values might not correspond to those actu-
ally received by the client.
•For Motion JPEG, these values will only be accurate as long as no frame rate limit has been
specified.
Frame rates - Motion JPEG
The following test results show the frame rates in frames/second (fps) for Motion JPEG
streams from the AXIS 214 PTZ, using a compression level of 50%. Note that these values
are guidelines only - actual values may vary.
Frame rates - MPEG-4
The following test results show the frame rates in frames/second (fps) for MPEG-4 streams
from the AXIS 214 PTZ. Note that these values are guidelines only - actual values may
vary.
The MPEG-4 test conditions:
• Compression level = 50%
• Video Object Type = Advanced Simple
• GOV structure = IP*
*Note that setting the GOV structure to use “I-frames only” will increase the frame rate.
fps
4CIF 25/30
2CIF expanded 25/30
2CIF 25/30
CIF 25/30
QCIF 25/30
fps
4CIF 17/21
2CIF expanded 17/21
2CIF 25/30
CIF 25/30
QCIF 25/30