Panasonic RRUS300E - Manual (Page 12)

VQT3T18
12
12
Change the microphone sensitivity in
accordance with the loudness of the sound
source. When the sound source is loud, set
the sensitivity to “ ” (LOW). When it is quiet,
set the sensitivity to “ ” (HIGH).
• When the unit is not in the stop state,
press [ STOP/RETURN].
1 Press [MENU/REPEAT MODE].
2 Press or to select “ ”.
3 Press or to select “ ” or
“ ”.
: Sets the microphone sensitivity to the
high level.
: Sets the microphone sensitivity to the
low level.
(The factory setting is “ ”.)
4 Press [ OK] to confirm the
setting.
You can change the sound quality for
recording.
• When the unit is not in the stop state,
press [ STOP/RETURN].
1 Press [MENU/REPEAT MODE].
2 Press or to select “ ”.
3 Press or to select “ ” or
“ ”.
: High sound quality mode
(128 kbps, monaural)
: Long recording mode
(32 kbps, monaural)
(The factory setting is “ ”.)
4
Press [ OK] to confirm the
setting.
● The length of time that recording is possible
changes depending on the sound quality.
(➜ page 33)
Changing the
microphone sensitivity
Changing the
sound quality