Panasonic RRUS300E - Manual (Page 22)

VQT3T18
22
22
Connecting the unit to a computer
You can import the recording files that were recorded
with the unit to a computer.
• Start the computer beforehand.
• Turn the unit off beforehand.
1
Remove the USB plug cover.
Store the removed USB plug
cover in a safe place.
● Keep the USB plug cover out of reach of children to
prevent swallowing.
2
Insert the unit into the computer.
Match the orientation
of the USB plug with
that of the USB port
and insert it straight
into the USB port.
This unit
Computer
● If the USB plug cannot be inserted firmly due to
the condition around the USB port, use the USB
extension cable (supplied).
● Operation is not guaranteed if the unit is connected
with a cable other than the supplied USB extension
cable.
● Do not use any other USB extension cables except
the supplied one.
Do not use the supplied cable with other devices.
Caution: Use only the supplied USB extension cable
with a ferrite core when connecting to computer.
● When the unit is connected to your computer, it
can operate without the battery, because power is
supplied by the computer.
■
The first time you connect the unit to a
computer
Because multiple “Found New Hardware” messages
will appear, do not disconnect the unit from your
computer until all messages disappear.
■
Screen display when connected to a
computer
During connection During file transfer
Never remove the unit during data transfer.
The file data or the unit may be damaged.
The unit cannot be operated while connected to a
computer.