Panasonic RRUS300E - Manual (Page 28)

VQT3T18
28
28
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the
remedies indicated in the chart do not solve the problem, consult your dealer for instructions.
Symptom Checkpoints
Battery
Cannot use a battery that
can still be used with another
device.
• The unit considers the battery to be empty at the point in time when the
battery level becomes low.
Operations
The unit does not work.
• Has the battery become dislodged? Remove the battery completely and
then reinsert it properly. Also try replacing the battery with a new one.
• Is the unit in the hold state? Cancel hold. (➜ page 7)
• The unit cannot be operated when connected to a computer.
Cannot operate the unit. • Is the unit in the hold state? Cancel hold. (➜ page 7)
• The unit cannot be operated when connected to a computer.
Recording
Memory space is used up
quicker than expected.
• The length of time that recording is possible greatly differs depending on
the sound quality. (➜ page 33) Select the sound quality according to the
purpose of use. (➜ page 12)
• Is there a large number of files? Organise the files. (➜ page 11)
I hear a howling noise mixed
with the audio when I listen
with earphones (not supplied)
during recording. • Turn down the volume. (➜ page 10)
• Keep the earphones and unit away from each other.
• When using an external microphone, keep the earphones and external
microphone away from each other.
Recording ended part way
through. • If the unit is dropped or otherwise subjected to an impact or the battery
becomes dislodged or runs out of power during recording, the recording
data may not be able to be updated.
• Has the internal memory run out of space?