Panasonic RRUS300E - Manual (Page 14)

VQT3T18
14
14
The playback speed can be adjusted in
21 steps from the slow speed of 0.5 times
normal speed (50%) to the fast speed of
2 times normal speed (200%).
1 Press [ OK] during playback.
2
Press or to adjust the
playback speed.
Playback speed
• : Each press of this button increases
the playback speed.
• : Each press of this button reduces the
playback speed.
The playback speed can be adjusted in
10% steps for speeds faster than normal
speed, and 5% steps for speeds slower
than normal speed.
• Press [ STOP/RETURN] to return to 100%.
3
Press [ OK].
The setting value is confirmed.
● Normal playback may not be possible
depending on the file.
Set a start point (A) and finish point (B) to
repeat playback between those points.
1
Press [ERASE/
] during
playback.
The start point (A) is
set and “
” (lighting)
and “ ” (blinking) are
displayed.
A-B Repeat indication
2
Press [ERASE/
] at the
finish point (B).
The indication changes
to “
” (lighting) and
A-B repeat playback
starts.
Cancelling A-B Repeat:
Press [ERASE/ ] again. (A-B Repeat can
also be cancelled with [ STOP/RETURN],
or .)
● You cannot set A-B Repeat when the time
between the start point (A) and finish point
(B) is approx. 2 seconds or less.
● If the file is played to the end while the start
point (A) is set, the end of the file is set as
the finish point (B) and A-B Repeat starts.
● A range that spans across two files cannot
be set for A-B Repeat.
Changing the
playback speed
A-B Repeat playback