Panasonic BL-C1A - Manual (Page 36)

Operating Instructions
36
2.3 [For BL-C20A] Using Wireless LAN
Wireless communication is possible by adjusting the settings of the wireless LAN
to those of the wireless router. Take a note of the settings and save them for
reference. For more information about wireless settings, please refer to http://
panasonic.co.jp/pcc/products/en/netwkcam/.
1. Click [Wireless] on the Setup page.
2. Set each parameter for Wireless Configuration.
Setting Description
SSID • The SSID must be set to match the SSID your wireless
router or wireless LAN uses. The SSID is limited to 32
characters (alpha numeric) and is case sensitive.
Communication
mode • 802.11b: There are a lot of 802.11b-compliant products
and they are inexpensive. They are widely prevalent, so it
is likely that 802.11b will match your existing wireless
devices.
• 802.11b/g (default): This mode supports both the 802.11b
and 802.11g wireless LAN standards. It is the
communication mode that is easiest to install on your
existing wireless LAN.
• 802.11g exclusive: This mode communicates using
802.11g only. It does not support the mixed standard mode
of 802.11b/g, so it allows the use of original features of
802.11g.
*1
*1 Even if "802.11g exclusive" is in use, the existence of other wireless devices using a 2.4
GHz bandwidth —including 802.11b wireless devices— may make the baud rate on the
802.11g slower.