Panasonic BL-C1A - Manual (Page 39)

Operating Instructions
[For assistance, please call: 1-800-272-7033] 39
2.4 Using UPnP™ (Universal Plug and Play)
UPnP TM can automatically configure your router to make it accessible from the
Internet. In order to use this feature, your router needs to support UPnP TM , and it
must be enabled. UPnP TM is disabled on most routers by default. See http://
panasonic.co.jp/pcc/products/en/netwkcam/ and your router's manual for
details of how to enable UPnP
TM . After UPnP TM is enabled on the router, set [Enable]
for auto port forwarding.
1.
Click [UPnP] on the Setup page.
2.
Set up UPnP.
Setting Description
Auto Port
Forwarding • If the network setting is [Static] or [DHCP], enabling auto
port forwarding allows you to access the camera from the
Internet.
Note
If the network setting is [Automatic Setup], also enable
[Allow Access from the Internet] on the Network page (see
page 33).
Display Shortcut
Icon in My
Network Places • Enabling this creates a shortcut to the camera in the My
Network Places folder.
Note
To enable this feature when using Windows XP or
Windows Me, enable the UPnP
TM Windows component
beforehand (see page 130).