Panasonic SC-NA30 - Manual (Page 10)

VQ
T5
C3
6
10
Preparation
Enable the Bluetooth
® function of the device you want to connect to, and bring it
closer to the unit.
• Use a Bluetooth
® device within the approximate range of 10 m (33 ft.) from the
unit.
• If you intend to use an NFC (Near Field Communication)-compatible Bluetooth ®
device, proceed to “One-Touch Connection (Connecting by NFC)” (> 11).
∫ Pairing with Bluetooth ® device
1 Press [Í/I] to turn this unit on.
The Bluetooth ® indicator (blue) blinks slowly.
• If this unit is being used for the first time (factory preset state):
The Bluetooth ® indicator (blue) blinks fast.  The unit will enter pairing standby.
 Skip to step 3.
2 Press and hold [ ] until the Bluetooth ® indicator (blue) blinks fast.
The unit will enter pairing standby.
3 Select “SC-NA30” or “SC-NA10” from the Bluetooth ® device’s Bluetooth ®
menu.
When the Bluetooth ® device is paired and connected, the Bluetooth ® indicator (blue) on the
unit lights up.
• If prompted for a passkey, input “0000”.
• If the Bluetooth
® device need to operate the Bluetooth ® pairing setting and the
Bluetooth ® connecting setting, operate both settings.
4 Start playing back music, a movie, etc. on your Bluetooth ® device.
• The volume can be adjusted by rotating the volume knob of the unit.
When the maximum or minimum volume is reached, you will be notified by a beep
sound.
∫ Listening to audio from a paired device
When this unit is turned on, the Bluetooth ® indicator (blue) will blink slowly indicating
that the unit is in connection standby mode. Please perform Steps 3 and 4.
• When the power is turned on, this unit is connected to the last-used Bluetooth ® device. At this
point, please perform Step 4.
Listening to audio from a Bluetooth ® device
Connecting via Bluetooth ® menu
SC-NA30_10PPC_VQT5C36_eng.book 10 ページ ２０１３年８月８日 木曜日 午前１０時３９分