Switching the communication quality, Disconnecting bluetooth – Panasonic SC-NA30 User Manual

Page 12

Advertising
background image

VQ

T5

C3

6

12

You can change the transmission speed to prioritize sound quality or connectivity.

• The default setting is “Emphasis on sound quality”. When the sound is interrupted, select

“Emphasis on connectivity”.

While pressing and holding [LP], press and hold [

] for 4 seconds or more.

Emphasis on connectivity:

A beep sound is emitted once, and the Bluetooth

®

indicator (blue) and the LP mode

indicator (green) flash once.

Emphasis on sound quality:

A beep sound is emitted twice, and the Bluetooth

®

indicator (blue) and the LP mode

indicator (green) flash twice.

Note

• Press [LP], and within 2 seconds, press [

]. If [

] is pressed after this time limit, the LP

mode setting will be changed.

• Turn off this unit or the device.
• Stop / disable the Bluetooth

®

transmission of the device.

• (For NFC-compatible devices only)

Touch and hold your device to NFC touch area of this unit again.

Note

• This unit can only be connected to one device at a time.
• This unit can register up to 8 devices.

When the number of registered devices exceeds the maximum limit, a device that has not
made a Bluetooth

®

connection for the longest time will be replaced. This will cancel the

registration of the device. To use the device again, re-register it.

• If the unit connected to the AC adaptor is selected from a Bluetooth

®

device, the unit will turn

on automatically even when it is turned off, establishing a Bluetooth

®

connection.

• If the image and sound are out of sync during playback, restart the playback app you are

using. If the problem persists, connect the Bluetooth

®

device and this unit with an audio cable

(commercially-available).

• The One-Touch Connection may not work properly depending on the type of device being

used.

• Depending on the specifications and settings of a device, it can fail to connect or some

operations can be different.

• Refer to the operating instructions of the Bluetooth

®

device for details.

Switching the communication quality

Disconnecting Bluetooth

®

SC-NA30_10PPC_VQT5C36_eng.book 12 ページ 2013年8月8日 木曜日 午前10時39分

Advertising
This manual is related to the following products: