Panasonic NCZA1 - Manual (Page 10)

GB10
Electrical Requirement
(For UK market only)
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT
CAREFULLY.
This appliance is supplied with a moulded three pin mains plug for your
safety and convenience. A 13-amp fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement
fuse has a rating of 13-amp and that it is approved by ASTA or BSI to
BS1362.
Check for the ASTA mark or the BSI mark on the body of the fuse.
If the plug contains a removable fuse cover, you must ensure that it is
refitted when the fuse is replaced.
If you lose the fuse cover, the plug must not be used until a replacement
cover is obtained.
A replacement fuse cover can be purchased from your local Panasonic
Dealer.
If the fitted moulded plug is unsuitable for the socket outlet in your home,
then the fuse should be removed and the plug cut off and disposed of
safely. There is a danger of severe electrical shock if the cut off plug is
inserted into any 13-amp socket.
How to replace the fuse
The location of the fuse differs according
to the type of AC mains plug (figures A
and B). Confirm the AC mains plug fitted
and follow the instructions below.
Illustrations may differ from actual AC
mains plug.
Open the fuse cover with a screwdriver
and replace the fuse and close or attach
the fuse cover.
Figure A Figure B
Fuse cover