Panasonic NCZA1 - Manual (Page 16)

GB16
Before Use
<Preparations>
1
Fill the water tank with fresh cold water.
1 Push the dispenser up into the upper position.
2 Push the water tank and pull it out.



3 Fill the water tank with tap water up to “Max”
(maximum) line.
Dry off the out side of water tank. “Max” (maximum) line
“Min” (minimum) line
4 Replace the water tank.
Push it until it snaps in.
Note
•Do not fill the water tank with milk (including soy and rice milk), mineral water, sparkling water or hot water etc. Only use tap
water.
•When filling the water tank with water, hold the bottom of the water tank with both hands.