Panasonic NCZA1 - Manual (Page 19)

GB19
Espresso/Coffee
1
Fill the coffee bean container with whole coffee beans and close the lid.
Then place a cup(s) or pot under the spout.
•When preparing drink for a pot, use the Latte Macchiato plate. (Height between the dispenser and Latte Macchiato plate:
approx. 14 cm)
•Make sure the door is closed firmly.
Note
•In order to reduce heat and splashing, adjust the dispenser height to
suit your cup size by moving it up and down.
If the dispenser is difficult to move, clean it. (P. GB36)
•When preparing 2 cups of drink, place the
cups under the spout side by side.
•Preheat a cup(s) or pot by pouring hot water or use the hot water
menu (P. GB26) to have hot and tasty coffee.
After preheating a cup(s) or pot, throw the hot water away.
2
Select “Espresso” or “Coffee” on the main menu.
Espresso
Coffee
3
Select the number of cups or pot and adjust the taste to your desire.
•The selected cup will light up in blue.
•Press
or repeatedly to adjust quantity for coffee and coffee beans. (P. GB15)
•If adjustment is unnecessary, move on to step 4.
(
e.g.: When 1 cup is selected
on espresso menu
(
e.g.: When 2 cups are
selected on coffee menu
(
e.g.: When pot is selected
on coffee menu
(Not available for espresso)
Note
•If is pressed, the display will return to the previous display.
•Fill the water tank with water up to “Max” (maximum) line when preparing 6 cups of drink for a pot.
•If you wish to memorise your settings, see P. GB33.
) ) )