AT&T 1485 - Manual (Page 39)

Replacing the Handset Battery Pack
1 Remove the battery compartment cover on the handset by pressing on
the indentation and sliding the cover downward.
2 Lift out the old battery pack and disconnect.
3 Align the two holes in the new battery pack’s plug with the socket pins,
and snap the plug into place. Place the battery pack in the
c o m p a rtment with the wires in the lower left corner, along the bottom
of the battery pack.
4 Replace the cover by sliding it up into place.
5 The new battery pack must be charged before using the phone. Place
the cordless handset in the charger and allow it to charge for at least
12 hours the first charge. The telephone might operate before that,but
for best performance, let the battery pack charge fully.
3 6
91-5418-10-00_att1485_r4 2003.6.11 10:24 AM Page 36