Installation, Base installation, Table/desk – AT&T 1485 User Manual
Page 7: Connect the telephone line cord, Connect the power cord, Check for dial tone, Connect the corded handset to the base
Advertising
4
INSTALLATION
Base Installation
Table/Desk
1
Connect the corded handset to the base
3
Connect the power cord.
The
light goes on,
and CL flashes in the Message Window.
4
Check for dial tone .
Lift the handset, you should hear a dial
tone.
Standard
electrical outlet
Modular
telephone jack
2
Connect the telephone line cord.
Use only the power cord supplied with this product. If you
need a replacement,call 1-800-222–3111.
91-5418-10-00_att1485_r4 2003.6.11 10:23 AM Page 4
Advertising