AT&T 1485 - Manual (Page 9)

6
5 Replace the adapter on the base so the larger end is toward
the bottom as shown.
6 Connect the corded handset to the base.
7 Connect the telephone line cord to the modular telephone
jack.
8 Plug the power cord into the electrical outlet.
The answer
light goes on,and CL flashes in the Message
Window.
Use only the power cord supplied with this product. If you need
a replacement, call 1-800-222–3111.
9 Mount the base on the wall.
a) Align holes on base
with mounting
studs on wall jack.
b) Pull base down on
mounting studs
until it locks into
place.
10 Check for dial tone .
Lift the corded handset; you should hear a dial tone.
91-5418-10-00_att1485_r4 2003.6.11 10:23 AM Page 6