Agilent Technologies N9340A - Manual (Page 127)

SCPI Command Reference 6
N9340A User’s Guide 125
Turn Averaging On/Off
[:SENSe]:AVERage:TRACe
1|2|3|4|5|6[:STATe] OFF|ON|0|1
[:SENSe]:AVERage:TRACe
1|2|3|4|5|6[:STATe]?
This command toggles averaging between off and
on. Averaging combines the value of successive
measurements to average out measurement
variations.
Set the Average Count
[:SENSe]:AVERage:TRACe 1|2|3|4|5|6:COUNt
<value>
[:SENSe]:AVERage:TRACe
1|2|3|4|5|6:COUNt?
This command specifies the number of
measurements that are combined.
*RST State:
Off
Key Access:
[TRACE] > {Average}
*RST Value:
100
Key Access:
[TRACE] > {Average}