Panasonic -eng - Manual (Page 25)

25
Copy function
Copy
5. Copy source image display
Up to 24 scenes from the beginning on the selected SD
card, DVD disc, or image data folder are displayed in
thumbnails.
In case of an SD card or folder, up to 24 pieces of
pictures from the beginning are also displayed after the
scenes successively.
• Scenes are indicated with a [
] symbol, and
pictures are indicated with a [ ] symbol.
• Thumbnails cannot be copied or moved by dragging
and dropping.
• If there are 25 or more scenes or pictures, a
message saying [Cannot display further] will be
displayed in the thumbnail area of the 24th image.
6. Copy source information display
Information about the copy source (SD cards, DVD
discs, and image data folders) is displayed.
7. Tip display
This displays information that is helpful for operating
the software.
8. Copy destination selection/display
If using method [Copy to PC]:
The location of the storage folder is displayed in the
upper column, and the name of the copy destination
folder, which is created in the storage folder, is
displayed in the lower column.
• The storage folder can be changed.
( l 65)
• The copy destination folder is named with the
recording date of the last recorded image and the
alphanumeric character _1-_9/A0-Z9/AA-ZZ.
(Example: [070530_1], [070530AZ]) (The name
cannot be changed.)
If using method [Write data to media] or [Copy
between media]:
Click [
] to select the SD card or the DVD disc as the
copy destination.
• If copying using method [Copy between media],
when the source is an SD card, only DVD discs are
displayed on the destination list. When the source is
a DVD disc, only SD cards are displayed as the
destination. (Data cannot be copied between the
same kinds of media, for instance from an SD card
to an SD card or from a DVD disc to another DVD
disc.)
8
6
7
5
To the next page
ENG-HDW1.0.book 25 ページ ２００６年１１月２１日 火曜日 午前１０時５１分