Panasonic -eng User Manual
Page 62
62
To produce a top menu and record
Easy edit
To produce your favourite image data
• If the page title is not entered, a top menu without
the page title will be produced.
2
Click [Font/Title] button.
3
Adjust the character’s settings (For details:
)
• Depending on the size of the characters, some
characters may not display or may overlap other
image. In these cases, adjust the size of characters.
6.
Click [Start output] button.
7.
When the confirmation message is displayed, click [OK].
• If [Cancel] is clicked, the display returns to the Top
menu production window.
8.
Recording progress is indicated on the progress bar.
• Click [Cancel] to stop recording midway through. (All
the data that has been recorded will be deleted.)
However recording cannot be stopped on DVD-R discs
and DVD-RW discs.
• It takes time to record all the data. Do not operate the
PC until the recording process is completed.
9.
Once the recording process is completed, the
following message will be displayed. Click [OK].
Exit the Top menu production window and return to the
Edit window
Tip
z
Set record speed or [Auto Protect] with the [Settings]
button.
z
Because it is necessary to record at least about 1 GB of
data in DVD-R disc and DVD-RW disc due to the standard,
when the produced data is less than 1 GB, dummy data
will be added so that the data totals about 1 GB.
Thus, even if the size of the images to be recorded is
small, the recording process will take time.
z
If the DVD-RW discs and DVD-RAM discs are protected,
data cannot be recorded to the discs. Clear the settings by
using the device that write protected the disc or enable the
[Auto Protect] settings
. (No protect function is
necessary on a DVD-R disc, which is write-once only.)
z
Operations are guaranteed only for images recorded by
the high definition video camera that this software is
supplied with. Images recorded by a different video
camera may not be recorded.
ENG-HDW1.0.book 62 ページ ２００６年１１月２１日 火曜日 午前１０時５１分