No protec, Button – Panasonic -eng User Manual
Page 64
64
Detailed settings for the respective functions
Settings/Convenient information
Adjust the settings related to the DVD drive.
1. [Select the default DVD drive]
Click [
] to select a drive that is set as the destination
in the initial setting for recording or copying to a DVD
disc.
2. [Choose the disc writing speed]
Recording speed for a DVD disc can be changed.
[Maximum] is the initial setting; however, if the
recording fails, select [Standard]. (This may correct the
problem.)
• [Maximum] is selected in the initial setting.
3. [Auto Protect setting for DVD-RAM/RW]
When [Auto Protect ON] is selected, the protection
setting will be cleared temporarily when data is
recorded onto a DVD disc that is protected. (The
protection setting will be turned on when the DVD disc
is ejected.)
Even a DVD disc that has been initialized or formatted,
which is not protected, will become a protected DVD
disc when it is ejected after recording data.
If [Auto Protect OFF] is selected, recording, etc. to
protected DVD discs is not possible.
[Drive settings] panel
1
2
3
ENG-HDW1.0.book 64 ページ 2006年11月21日 火曜日 午前10時51分