Panasonic -eng User Manual
Page 72
72
When a problem occurs
Settings/Convenient information
When the following problem occurs
Confirm the following
Images do not play back properly.
z
Close any other software that is running.
z
Update the device driver for the sound card and/or video card.
z
Depending on the throughput of the PC, playback may be jerky due to a reduced frame
rate.
Voice is not audible.
z
Confirm that [Volume Control] and [Line input] are not muted in [Volume Control]
window of the PC.
z
Voice will not play back while the image is paused.
Image data cannot be edited.
z
When a top menu is attached to the image data, the image data cannot be edited. If an
image data with an attached top menu is edited, discrepancies may occur between the
top menu and the actual data. Thus, the top menu must be deleted before editing with
this software.
A new top menu can be added after editing, but the deleted top menu will not be retained.
In order to retain the original data, copy the image data before editing.
When a scene is split, a thumbnail that
differs from the image at the split point
is displayed.
z
Since editing accuracy is about 0.5 seconds, a thumbnail that differs from the image at
the split point may be produced, but it is not a malfunction. (This software is not capable
of editing images frame-by-frame.)
When a scene is deleted, an error
message indicates that the capacity is
not sufficient.
z
If the deleted scene is a part of a video (file), a copy of the remaining part (scenes) will
be produced first, and then the original file will be deleted. Thus, some free space for
copying data temporarily is required, and it takes time.
I want to delete/edit a picture.
z
Pictures can be displayed and deleted by image data basis, but cannot be deleted
one-by-one and edited.
Editing image data
ENG-HDW1.0.book 72 ページ ２００６年１１月２１日 火曜日 午前１０時５１分