Panasonic -eng - Manual (Page 26)

26
Copy function
Copy
9. Copy destination information display
Information about the copy destination (SD cards, DVD
discs, and hard disk (the copy destination folder)), etc.
is displayed.
• If the DVD-RW discs and DVD-RAM discs are
protected, data cannot be copied to the discs. Clear
the settings by using the device that write protected
the disc or enable the [Auto Protect] settings
( l 64) .
(No protect function is necessary on a DVD-R disc,
which is write-once only.)
• If the size of the source data exceeds the free space
on the destination, [Free space] will be displayed in
red. Use an SD card or DVD disc with sufficient
capacity to accommodate the data, or edit
( l 47) the
image to reduce the size before copying.
• Items that have any problems will be displayed in red.
(For instance, the file system does not match.)
10. [Refresh] button
Click this button to update the display. Click this if the
drive is not displayed after replacing DVD discs or
reconnecting a high definition video camera.
• When an SD card is inserted, it will not be detected
automatically. It is always necessary to click the
[Refresh] button.
11. [Start copying]/[Start writing] button
Click this button to start copying.
• The actual button displayed will differ depending on
the copy method.
12. [Settings] button
Click this button to display detailed settings window for
HD Writer.
( l 63)
13. [Return to Start Menu] button
Click this button to exit the Copy window and return to
the [Start Menu] window.
Tip
z When the drive is not displayed after replacing an SD card
or DVD disc or when thumbnails and information about the
images are not updated after reselecting a folder, click
[Refresh] button.
13 12 10 11
9
ENG-HDW1.0.book 26 ページ ２００６年１１月２１日 火曜日 午前１０時５１分