Panasonic WV-ASC970 - - Manual (Page 23)

23
● Links between two SX650 Switch Nodes
In general, you can find video links from a matrix switch output to a matrix switch input. These links must cross two
different system domains.
● Enter Video Links in the WV-ASC970 Admin
In the ASC970 Admin Console main menu, select the Routing on the Domain menu. The LINK screen will be acti-
vated. Then enter the video link(s) here in order for the system to perform video routing properly. The following table
is based on the example from on page 16.
ID Enable Video Source Video Destination Navigation
Unit Switch Port Unit Switch Dev Id Ch Cost
1 ✓ 1 SX650 3 1 IPRO 11 1 1
2 ✓ 1 SX650 4 1 IPRO 11 2 1
In the above video link table, operators are able to enable or disable a video link. The system will not use a link that
is disabled.
Also in the above video link table, the destination Unit ID and source Unit ID are the same. They also can be differ-
ent in a multiple domain system.
In the example on page 19, there is no video link in the system, and operators can skip this configuration.
■
Define System Operators
● System Operators
System operators are also called global operators or system users. In order to seize a system resource, such as a
camera in a foreign domain, the system requires a global operator. When a global operator logs into a system con-
troller, it becomes a global controller.
The global operator is subject to unit partitioning restrictions, where within their domain, she/he will act like a local
super user.
● Enter Global Operators in the WV-ASC970 Admin Console (Global Database)
In the WV-ASC970 Admin Console main screen, select Operators → Records on the Components menu. The
OPERATORS screen will be activated. Then, enter the operator(s) information into the fields provided. For global
operator(s), you can select one of the four global class levels.
User ID Password Priority Timeout Name Class
500 500 2 00:00:00 Global Operator 1 20: Global Level 0
100 123 10 00:00:00 Global Operator 2 20: Global Level 0
● Enter Operator to Unit Partitioning in the WV-ASC970 Admin Console
In the WV-ASC970 Admin Console main screen, select Operator → Records on the Components menu. The
OPERATORS screen will be activated. Then, select the Unit tab and check the partitioning you want to apply to a
global operator.